1. Totally interchangeable with original.
2. For different kinds of hydraulic systems.
3. Nominal size: 06,10,16, 25
4. Max. operating presure 25Mpa(250bar), max. flow 250 L/min
5. It‘s pipeless stack type valve which is designed to meet various technological requirement of new era.
6. The valve is standardized in accordance with each size, any hydraulic circuit can be composed by bolting the various stacks together.
+This valve is employed to keep the pressure of some circuit lower than the main circuit pressure.
+Drain port should be connected to tank.
+Pressure difference between primary pressure and secondary pressure should be maintained over then 10 bar for good pressure reduction.
+Drain oil flows when reducing valve outlet is lower than its inlet. This generates a small amount of heat in the system.
+The pressure will be increased when the pressure adjustment handle is turned clockwise, and will be reduced when the pressure adjustment handle is turned counter-clockwise.
+Be sure to re-tighten the llock nut firmly after making adjustment to the pressure.
+A reducing-relieving valve sets maximum outlet pressure, then relieves fluid to tank when outlet pressure tries to go higher.
PRESSURE ADJ,KNOB TYPE
(SIZE 06 H TYPE ONLY)